This is a multi-part message in MIME format.

- ------=_NextPart_000_000A_01BD3739.714EDFE0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Deschutes Corporation is designing FIB Systems targeted to MEMS =
fabrication.

If you have a part that could benefit from being milled by an Ion Beam =
(Ga source) using a Focused Ion Beam system, FIB, we can perform this =
work for you. The beam can be adjusted from approximately 15 nm to 500 =
nm beam diameter (spot size) and the beam current can be adjusted in a =
wide range. The beam sputter material. In addition we can deposit =
material very accurately (Tungsten, Platinum, etc) both conductive and =
insulator material. We can mill out bridges, tips using a pattern =
generator to which you can download any pattern to control the beam.

We are right now looking for samples to use in a demo project, it could =
be an AFM tip, thin film head for hard drives, a sensor, an entire micro =
optic bench, lenses, mirrors or lasers, only your imagination sets the =
limits!

Please let me or the CC email address above know if you are interested =
in taking advantage of this limited offer.

Regards,
Steve Rosenberg
Deschutes Corporation

- ------=_NextPart_000_000A_01BD3739.714EDFE0
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable









Deschutes Corporation is designing =
FIB Systems=20
targeted to MEMS fabrication.
 
If you have a part that could =
benefit from being=20
milled by an Ion Beam (Ga source) using a Focused Ion Beam system, FIB, =
we can=20
perform this work for you. The beam can be adjusted from approximately =
15 nm to=20
500 nm beam diameter (spot size) and the beam current can be adjusted in =
a wide=20
range. The beam sputter material. In addition we can deposit material =
very=20
accurately (Tungsten, Platinum, etc) both conductive and insulator =
material. We=20
can mill out bridges, tips using a pattern generator to which you can =
download=20
any pattern to control the beam.
 
We are right now looking for samples =
to use in a=20
demo project, it could be an AFM tip, thin film head for hard drives, a =
sensor,=20
an entire micro optic bench, lenses, mirrors or lasers, only your =
imagination=20
sets the limits!
 
Please let me or the CC email =
address above know=20
if you are interested in taking advantage of this limited =
offer.
 
Regards,
Steve Rosenberg
Deschutes =
Corporation

- ------=_NextPart_000_000A_01BD3739.714EDFE0--


------- End of Forwarded Message