A MEMS Clearinghouse® and information portal
for the MEMS and Nanotechnology community
RegisterSign-In
MEMSnet Home About Us What is MEMS? Beginner's Guide Discussion Groups Advertise Here
News
MEMSnet Home: MEMS-Talk: Re: Glass bonding
Re: Glass bonding
1999-03-12
Tom Wester
Re: Glass bonding
Tom Wester
1999-03-12
You may want to look at glass frit material. Frits are common in the glass
industry.
-Tom Wester
-----Original Message-----
From: JAVED ASHRAF 
To: [email protected] 
Date: Thursday, March 04, 1999 11:44 PM
Subject: Glass bonding


>This is a multi-part message in MIME format.
>
>------=_NextPart_000_0008_01BE667D.28F8ED20
>Content-Type: text/plain;
> charset="iso-8859-1"
>Content-Transfer-Encoding: quoted-printable
>
>I am looking for information on bonding or sealing of glass to glass. =
>The glass parts come in the form of polished flat substrates, and can be =
>as thin as microscope slides or as thick as photomask blanks (0.90 =
>inch). The bond should be direct--I would like to avoid using bonding =
>films or adhesives. However, glass-based bonding layers which can be =
>deposited on one or both of the glass substrates would be alright. The =
>bonding can be done at any temperature provided the glass parts are not =
>deformed or distorted. The glass can be any of the commonly available =
>commercial glasses such as soda-lime, borosilicate, or even fused =
>silica. I would appreciate any information or leads.=20
>
>------=_NextPart_000_0008_01BE667D.28F8ED20
>Content-Type: text/html;
> charset="iso-8859-1"
>Content-Transfer-Encoding: quoted-printable
>
>
>
>http-equiv=3DContent-Type>
>
>
>
>
>
I am looking for information on bonding = >or sealing=20 >of glass to glass. The glass parts come in the form of polished flat = >substrates,=20 >and can be as thin as microscope slides or as thick as photomask blanks = >(0.90=20 >inch). The bond should be direct--I would like to avoid using bonding = >films or=20 >adhesives. However, glass-based bonding layers which can be deposited on = >one or=20 >both of the glass substrates would be alright. The bonding can be done = >at any=20 >temperature provided the glass parts are not deformed or distorted. The = >glass=20 >can be any of the commonly available commercial glasses such as = >soda-lime,=20 >borosilicate, or even fused silica. I would appreciate any information = >or leads.=20 >
> >------=_NextPart_000_0008_01BE667D.28F8ED20-- > >
reply
Events
Glossary
Materials
Links
MEMS-talk
Terms of Use | Contact Us | Search
MEMS Exchange
MEMS Industry Group
Coventor
Harrick Plasma
Tanner EDA
Tanner EDA by Mentor Graphics
MEMStaff Inc.
Mentor Graphics Corporation
Addison Engineering