Quick side comment not directly related to the issue:
My admiration to all of you for the forthright and open manner you exchange
technical information across educational, industry and company lines. I
believe this is the very use originally intended for the internet.
Those of us in the facility engineering and construction field can take a
lesson from "MEMS-Talk."
John Milliken
Project Manager
Fluor Daniel
15242 NW Greenbrier Parkway
Beaverton, Oregon 97006
503-533-4466
"Rick Williston"
width.com>
Sent by: cc:
mems-talk-admin@mem
snet.org Subject: RE: [mems-talk]
Sputtering of Cr.
01/17/2002 08:41 AM
Please respond to
.
mems-talk
Your theory is correct. One way to stop this from occurring is, if
possible, to place a grounded, fine-mesh screen in close proximity to the
surface of the part you are cleaning. The microwaves couple to the screen
and some of the species doing the etching can still reach the resist.
Don't pick too fine a gauge screen or it will oxidize, become highly
resistive and cease to function. Too course and the microwaves will heat
your sample; you will have to experiment here to get it right. Try and
pick
a screen from a vacuum equipment supplier; the manufacturer of your asher
should be able to recommend something.
Rick
-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of [email protected]
Sent: Thursday, January 17, 2002 1:09 AM
To: [email protected]
Subject: [mems-talk] Sputtering of Cr
Dear All,
I have been using a microwave asher to remove hardened resist after RIE
etching. I tried to remove some resist residue recently on a 6" wafer that
had 1um of Cr deposited on it. I used the following parameters 600ml/min
oxygen which gives about 0.8 bar and 600W power for 60mins. I found that
the Cr had been etched and re-deposited all over the inside of the chamber
as CrOx (i think it could be) ! Does anyone have any idea about how this
might have happened ? My theory is that the microwaves have coupled into to
the wafer and increased the surface temperature.
many thanks,
Iain Watson.
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************
_______________________________________________
[email protected] mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk
Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.mems-exchange.org/
_______________________________________________
[email protected] mailing list: to unsubscribe or change your list
options, visit http://mail.mems-exchange.org/mailman/listinfo/mems-talk
Hosted by the MEMS Exchange, providers of MEMS processing services.
Visit us at http://www.mems-exchange.org/
--------------------------------------------------------------------------------
---------------------
The information transmitted is intended only for the person
or entity to which it is addressed and may contain confidential
and/or privileged material. If you are not the intended recipient
of this message you are hereby notified that any use, review,
retransmission, dissemination, distribution, reproduction or any
action taken in reliance upon this message is prohibited. If you
received this in error, please contact the sender and delete the
material from any computer. Any views expressed in this message
are those of the individual sender and may not necessarily reflect
the views of the company.
--------------------------------------------------------------------------------
-----------------------
