Pradeep Kumar Yadav's Resume

Contact	BSNL Type IV quaters, 23/3A , kali Bari Marg New delhi, New delhi 110001 IN 9811662942 [email protected]	Goal	Nano Technologist/ MEMS
Contact		Skills	Hard work , Positive Attitute to chase the Goal
Qualifications	Pradeep Kumar Yadav A) PERSONAL PROFILE Name of the applicant Pradeep Kumar Yadav Father's Name Sri Binda Din Yadav Date of Birth 14/09/1981 Sex Male Nationality Indian Present Address: BSNL TYPE IV Quarters, Block no 23, Room no.3A, Kali Bari Marg, New Delhi-110001 India Phone Number: 0091-9811662942 Email: [email protected] B) ACADEMIC QUALIFICATION AMITY INSTITUTE OF NANOTECHNOLOGY,INDIA NOVEMBER,2003TONOVEMBER,2005 MASTEROFTECHNOLOGY(NANOTECHNOLOGY) 10.0/10 (IV)7.29/10 (III)8.0/10 (II)7.3/10 (I) NORTH MAHARASTRA UNIVERSITY , INDIA MAY, 1999TOMAY, 2003 BACHELOR ENGINEERINGINCOMPUTER SCIENCE FIRST CLASS KENDRIYA VIDYALAYA, RAEBARELI, INDIA MAY, 1998TOMAY, 1999 ALL INDIA SENIOR SCHOOL CERTIFICATE EXAMINATION FIRST CLASS KENDRIYA VIDYALAYA, RAEBARELI, INDIA MAY, 1996TOMAY, 1997 ALL INDIA SECONDARY SCHOOL EXAMINATION FIRST CLASS C) LABORATORY EXPERIENCE AREA OF Photo Lithography SPECIALIZATION: Large Band-gap Semiconductors Ultra thin film deposition Nano Electronics using Carbon Nanotube. NEMS and MEMS based Sensors. COMPUTATION: Programming Languages C, C++, Visual Basic 6.0, SQL, Developer 2000, Tools MS-Office, IntelliSute for MEMS Design Operating Systems MS-Dos, UNIX, WIN 95/98/2000, WIN NT 4.0 INSTRUMENTS USED: Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM). Lab Ram 300 – Micro Raman Spectrometer System Plasma Enhanced Chemical Vapor Deposition (PECVD) Edward Thin Film Evaporator Optical Profilometer UV -VIS spectroscopy Photo-Lithography FABRICATION: i) Synthetic techniques of Metal Nanoparticles and Semiconductors Nanomaterials (Ag, Cu, Fe2O3, TiO2 etc.) by wet Chemical methods. ii) Preparation of Carbon Nanotube by Chemical Vapour Deposition (CVD). iii) Preparation of Nanocatalysts (Ni, Co, Fe) by wet chemical methods. D) BRIEF REPORT OF THE PROJECT WORK i) PROJECTS: MASTER OF TECHNOLOGY (Nanotechnology) Title: Growth of carbon nanotubes on Ni islands, created on tin oxide substrate for potential application of sensor based devices. Position Final year project student. Summary: This project is based on diode-type configuration. In many experimental situations, the study carbon nanotube base devices, in particular when some nano-scale characteristics of the materials are of interest, it is essential to grow catalyst such as Ni island/dots. Ni islands are created on tin oxide substrate. Afterward, we will be growing carbon nanotubes on to that. The Field emission performances will be obtained from the diode-type electrode configuration in terms of turn-around voltage, emission current and field enhancement factors. Duration : Four Months (14th September, 2005 to 12th January, 2006). Location: Nanotechnology Research Institute (NRI), University Of Ulster, Jordanstown, Northern Ireland, UK ii) PROJECTS: MASTER OF TECHNOLOGY (Nanotechnology) Title: Sample Preparation and Synthesis of Carbon Nanotube (CNT). Summary: Carbon Nanotube are generally prepared by Arc Discharge, Chemical Vapour Deposition and Plasma Enhanced Chemical Vapour Deposition. I have worked on Chemical Vapour Deposition and Plasma Enhanced Chemical Vapour Deposition for synthesis of CNT. In Chemical Vapour Deposition, coat the substrate with catalyst and place it in the oven. Heating range should be 650-900 oC and then slowly add carbon-containing gas i.e. methane gas. As carbon decomposes, it releases carbon atoms, which recombines and form nanotube. In Plasma Enhanced Chemical Vapour Deposition, first create a plasma which increases the chemical reaction takes place between the source gases. The product of that reaction is a solid material which condenses on all surfaces inside the reactor. Duration: Two Months (12th July, 2005 to 09th September, 2005). Location: Defence Research and Development organization (DRDO), Timarpur, India iii) PROJECTS: MASTER OF TECHNOLOGY (Nanotechnology) Title: Piezo-Resistive Pressure Sensor Software tool used: IntelliSuite Summary: Piezo-Resistive effect refers to a change in the electric resistance of a material when stresses or strains are applied. I have played with Piezo-resistive material in such a behavior in the diaphragm that for sensing the induced strains as an applied pressure that deflects the diaphragm. After that, analyze that deflection in terms of resistance. Duration: Two and half Months (15th January, 2005 to 30th March, 2005) Location: Semiconductor Complex Limited (SCL), Chandigarh, India. iv) PROJECTS: BACHELOR IN COMPUTER SCIENCE Title: Global Positioning System Software tool used: Visual Basic 6.0 Summary: The GPS uses satellite and computers to compute positions anywhere in the Earth. The GPS is based on satellite ranging. Satellite provides all relevant details to the computer about the person or anything. It is used in Radar, Mobile etc. I have made front end software. In that which received signals that were coming from satellite. And that signal describes about the position with respect to latitude and longitude. That signals was in ASCII mode. So that software coverts ASCII mode into Hexadecimal mode. Duration: Seven Months (September2002 to April, 2003) Location: Hindustan Aeronautical Limited, India E) PRESENTATION EXPERIENCE SEMINAR TOPICS: MASTER OF TECHNOLOGY (Nanotechnology) · Growth, Characterization and Application of Porous Silicon · DNA Computer · Piezo Resistive Pressure Sensor SEMINAR TOPIC: BACHELOR IN COMPUTER SCIENCE · Simputer PAPER PRESENTED: · Presented a paper titled “Simputer” at S.E.S. College of Engineering in TECHNO-FEST 2002. NATIONAL CONFERENCES ATTENDED: · Common Education Program(CEP) conference on Growth and Applications of Carbon Nanotube, 8-12 August 2005, Defence Research and Development Organization(DRDO) ,Timarpur, Delhi, India. · National Conference attended Nanomaterials and Applications organized by Amity Institute of Nanotechnology, 27-28 May, New Delhi, India. · National Conference attended ICON-2003 (International Conference on Nanotechnology), 20-22 December 2003, Punjab, India. · XXVII Annual Meeting and Conference on Electron Microscopy and Allied fields, 1-3 April, 2004, National Physical Laboratory, New Delhi, India. F)HOBBIES AND INTERESTS · Won Ist prize in Table Tennis in School level and College level. · Won Ist prize in Football in School level. · Reading books and Adventurous novels. · Playing Badminton, seeing English movies. G) REFERENCES 1. Prof. Waqar Ahmed, Nanotechnology and Advanced Materials Institute, NIBEC, University of Ulster, Jordanstown campus, Shore Road, Newtown abbey, Co. Antrim, BT37 0QB, N. Ireland, UK. Tel: 0044-28-90368943 E-mail: [email protected] 2. Dr. Anindya Datta, Amity Institute of Nanotechnology, Sector-125, Super express Highway, Noida, India Tel: 0091-09899627295 E-mail: [email protected] 3. Dr. Susanta Sinha Roy, Nanotechnology and Advanced materials research institute, NIBEC, University of Ulster, Jordanstown campus, Shore Road, Newtown abbey, Co. Antrim, BT37 0QB, N. Ireland, UK Tel: 0044-28-90366319 E-mail: [email protected]

Updated: 2006-04-26

Files